Technology

  • 09 July 2019

    A new production and assembly hall for flat dies for Reifenhäuser

    The Reifenhäuser Group has started construction of a new production hall at the headquarters in Troisdorf. With the groundbreaking ceremony, the project is now entering the intensive construction phase. The new production and assembly hall with an area of 3,000 square meters is expected to be completed by spring 2020...
  • 09 July 2019

    Chen Hsong opens subsidiary in Germany

    Hong Kong-based injection moulding machine manufacturer Chen Hsong established a new German subsidiary, Chen Hsong Germany, in Kempen on the Lower Rhine, to better serve the German market as a highly competent partner and supplier of plastic injection moulding machines for both standard and specialized solutions...
  • 09 July 2019

    Seeding for innovation, digitalisation and the circular economy

    At K 2019, the Erema Group will be showcasing its full range of products and services for the plastics recycling process more comprehensively than ever before. For the first time, a total of seven companies and business units - Erema, Powerfil, Keycycle, Pure Loop, 3S, Umac and Plasmac - will be representing the Erema Group at the trade fair. Even…
  • 09 July 2019

    Only one KraussMaffei

    Munich-based mechanical engineering group KraussMaffei is reinventing itself. The provider of ready-to-use system solutions for injection moulding, extrusion and reaction process technology, is now consolidating all business divisions and its previous brands KraussMaffei, KraussMaffei Berstorff and Netstal within a single, unified brand...
  • 09 July 2019

    Macchi: production up by 13.6%

    Macchi financial statement for 2018 has been approved and Paolo Perazzi, General Manager of the company, has expressed a reasonable satisfaction and great optimism, commenting the results as follows: “2018 was a very special year for Macchi. Starting from July, together with the owners and the board we took a path towards...
  • 03 July 2019

    More filtering surface without enlarging the size of the filter

    An innovative FlexDisc filter for piston-activated screen changers substantially enlarges available filtration area without the need to increase machine size, enabling processors and recyclers to achieve finer filtration, higher throughputs, longer filter service life, and reduced specific backflush volume. Nordson Corporation recommends the...
  • 03 July 2019

    Being more competitive in the extrusion of profiles

    Good sales reports confirm the position of Amut Group as skilled supplier of high-level technology extrusion lines for edgebanding application. “Last year we acquired four new Europe-based customers, one important player in China purchased two lines and other two customers confirmed second line order. To achieve...
  • 26 June 2019

    Hilger Gross at the head of the plastics division of Sikora

    Since May 16, 2019, Hilger Gross has taken on the position as Business Development and Area Sales Manager at Sikora in Bremen. In this function, he is in charge of the “plastics” business unit. With Hilger Gross, a highly experienced manager is responsible for the worldwide sale of Sikora’s inspection, sorting and analysis systems for plastic…
  • 26 June 2019

    New consumer trends, production challenges and enabling technologies

    Quality and dynamic, personalised, efficient and sustainable production processes are the requirements of smart manufacturing, the ones that today all industrial companies are looking to. In order to meet these needs, B&R delivers high-performance machines, connected and flexible but most importantly adaptive, that can be used securely...
  • 26 June 2019

    Star Automation Europe strengthens its operations in Lombardy

    Two new agency agreements were recently signed by Star Automation for the distribution of its products in Lombardy. Covini Rappresentanze was entrusted with the provinces of Bergamo, Brescia, Cremona and Mantua, an area where the agent already boasts an established network of contacts thanks also to the agreements with...
  • 26 June 2019

    A haul-off for large-diameter thick HDPE pipes

    For today’s market of HDPE pipes for pressurized media - increasingly focused on large diameters and wall thicknesses - and profiting from its experience of over 50 years in the development of machines downstream to pipe extrusion lines, Sica has developed the new multi-caterpillar P3500/24Plus haul-off, which is capable of...
  • 19 June 2019

    A new company for a new hot runner system

    The FDU (Flat Die Unit) was originally a research project that was developed with the know-how of Haidlmair Group companies with the support of the toolmaker from the Upper Austrian town of Nussbach. The innovation was presented to the public in 2016 and has been continuously developed ever since. For some time now...
  • 19 June 2019

    Motion control with electric, hydraulic and hybrid technology

    Moog attended the SPS IPC Drives Italia trade show from May 28 to 30 at the exhibition grounds in Parma, Italy, an opportunity for the company to exhibit its “total solution”, combining electric, hydraulic and hybrid technologies, designed to meet all of its customers’ requirements...
  • 19 June 2019

    The Hot Fill System now on all MiPET blow moulding machines

    The Hot Fill System has been added by Meccanoplastica Ibérica to its entire range of MiPET blow moulding machines for PET preforms. With this option, so far only available on some selected models, the division of the Meccanoplastica Group dedicated to stretch blow moulding technology intends to offer efficient solutions to cover a wide range of...
  • 19 June 2019

    A MO 3062 printing machine for bottle caps in Ethiopia

    A new printing machine for plastic bottle caps with a 2-colour dry-offset head by Moss has been recently installed and started up at the premises of a major Ethiopian plastic processor, already supplier of PepsiCo. The machine will decorate the caps of soft drink  bottles. Before this one, Moss had already delivered a single-colour screen printer…
  • 12 June 2019

    3D printing of final flight parts for an innovative aircraft program

    Marshall Aerospace and Defence Group is now using advanced 3D printing from Stratasys to manufacture, flight-ready parts for several of its military, civil and business aircraft - while producing specific ground-running equipment at a lower cost than aluminium alternatives. The company is currently one of the world’s largest privately owned and...
  • 12 June 2019

    Condition monitoring system awarded

    At this year’s Plastpol in Kielce, Wittmann Battenfeld was able to convince an independent jury consisting of experts from universities and specialist institutes of the benefits offered by its condition monitoring system (CMS) when used in injection moulding machines for processing plastics. CMS is a system of sensors to monitor the condition of…
  • 12 June 2019

    Scholz received its hundredth Allrounder

    Recently, Scholz from Kronach, Germany, received its one-hundredth Allrounder in a ceremony. For this special occasion, Gertrud Ebert, Managing Director and limited partner, as well as Karl-Herbert Ebert, Head of Technology and Development and authorized signatory of Scholz, travelled to the Arburg parent factory in Lossburg. The...
  • 05 June 2019

    1,000 injection moulding machines in 5-10 years

    One of the world’s largest producers of plastic injection moulding machines, Haitian International Holdings has opened the construction of one of its manufacturing site in the Americas, following its global long-term strategy to manufacture and assemble locally. The new Mexican plant with an area of 92,000 sqm is located in...
  • 05 June 2019

    An ACF thermoforming machine worked with Ingeo PLA during Chinaplas

    Bioplastics is certainly the main topic discussed by plastics players nowadays. The targets globally pursued include to eliminate unnecessary packaging, move from single use to re-use attitude and promote the utilisation of materials made from renewable resources to be applied in different sectors. Since many governments have expressed the...